Aluminum wire drawing machine Inlet 0.5 to 1.0mm Outlet 0.08 to 0.25mm CCA wire drawing machine
Main technique parameter:
1. Usage: Bare copper wire drawing
2. Inlet diameter: 1.0mm-0.5mm
3. Outlet diameter: 0.08mm-0.25mm
4. Maximum drawing speed: 1800MPM/MAX
5. Dies
Number: 24 dies (Customer self provided) 25mm*8
No. 1 is independent; No.2~24 are made of cast iron
Pedestal can be adjusted according to the capstan
6. Mechanism surface reduce rate:
From No.1 to No.23 10%
No.24 6%
More options
Aluminum wire drawing machine Inlet 0.5 to 1.2mm Outlet 0.15 to 0.3mm CCA wire drawing machine
Main technique parameter:
1. Usage: wire drawing
2. Inlet diameter: 1.2mm-0.5mm
3. Outlet diameter: 0.15mm-0.3mm
4. Maximum drawing speed: 2000MPM/MAX
5. Dies
Number: 24 dies (Customer self provided) 25mm*8
No. 1 is independent; No.2~24 are made of cast iron
Pedestal can be adjusted according to the capstan
6. Mechanism surface reduce rate:
From No.1 to No.23 13%
No.24 8%
7. Drawing method: 4 spools double tiers arrangement; horizontally sliding continuous drawing
8. Motor: Drive motor: 11KW AC frequency converter control
Spooling motor: 3.7KW AC frequency converter control
Aluminum wire drawing machine Inlet 1.2 to 2.05mm Outlet 0.4 to 1.2mm CCA wire drawing machine
Main technique parameter:
1. Usage: fine aluminium wire drawing
2. Inlet diameter: 1.0mm-2.05mm
3. Outlet diameter: 0.4mm-1.2mm
4. Maximum drawing speed: 2000MPM/MAX
5. Dies
Number: 24 dies (Customer self provided) 25mm*8—12mmT
No. 1 is independent; No.2~23 are made of cast iron
Pedestal can be adjusted according to the capstan
6. Mechanism surface reduce rate:
From No.1 to No.23 13%
No.24 8%
7. Drawing method: 4 spools double tiers arrangement; horizontally sliding continuous drawing
8. Motor & inverter: main motor: AC 15KW, Brand: WanNan
Spooling motor: AC 3.7KW, Brand: WanNan
Inverter: AC 15KW for main motor
AC 3.7KW for take-up motor
17IWD Al wire Intermediate drawing machine
1,Main technique parameter:
1. Usage: Aluminum wire
2. Inlet diameter: 3.0-3.5mm
3. Outlet diameter: 2.5mm-0.6mm
4. Maximum drawing speed: 1200m/min
5. Dies number: 17 (Customer self provided) 30mm*8
6. Mechanism surface reduce rate:
From No.1 to No.16 18%
No.17 12.5%
7. Drawing method: 4 shafts horizontal arrangement; sliding continuous drawing
8. Drive motor: 37KW/AC frequency converter control
9. Spooler motor: 11KW/AC frequency converter control
10. Frame: Ironed cast
11. Transmission: All transmission by flat belts; main motor lubricated by petroleum
12. Capstan: four-tier capstan; tungsten carbide (6 months of guarantee)
13. Lubrication system: Spray type; lubrication oil 100 liter/min (without water pump)
14. Spooler: Without shaft;
Automatically pneumatic brake when wire is broken;
Single shaft fixed with screw (manually self-lock)
Manual hydraulic unloading (with loading & unloading cart)
15. Spool dimension: 500/630mm
| Outer diameter | Inner diameter | Outer wide | Inner wide | Bore diameter | Position bolt |
| 630 | 360 | 430 | 400 | 127 | 200 |
| 500 | 360 | 346 | 322 | 127 | 200 |
16. Capacity for wire receiving: 200-500KG
17. Traversing unit:
Traversing system: 90W low speed reversible motor type;
Traversing width: 480mm/Max
18. Spooling tension control: Pneumatic balance automatically controls spooling tension (pneumatic source provided by customer self)
RBD-400/13 Capstan Type Aluminum rod Breakdown Machine
RBD-400/13 Aluminum rod breakdown machine is used to draw Φ9.5mm ordinary aluminum rod into Φ1.7mm-Φ4.5mm wire, Drawing capstans are arranged in a line. Fixed speed capstan and other twelve drawing capstans are controlled by two electric motors respectively. It is with quickly change dies system.
1. Main technical parameters:
1.1 Max inlet diameter: Φ9.5mm
1.2 Outlet diameter: Φ1.7mm-Φ4.5 mm
1.3 Max. drawing speed: 25m/s
1.4 Diameter of drawing capstan: Φ400
1.5 Max. No. of drawing dies: 13 dies
1.6 Size of drawing dies: Φ38×25
1.7 Max storage capacity of wire accumulator: 8m
1.8 Motor power of drawing machine : 200KW AC
1.9 Motor power of fixed speed capstan: 55KW (AC)
1.10 Motor power of dual-spool take-up: 15KW*2 (AC)
2. Components of machine:
2.1 Pay-off stand with a rotating arm: 1 Set
2.2 Host drawing machine: 1 Set
2.3 Dancer: 1 Set
2.4 Double spooler take up 1 set
2.5 wire pointer machine: 1 Set
2.6 Electric control system and console : 1 Set.
More options
![Aluminum Wire Drawing Machine Inlet 0.5 To 1.0mm Outlet 0.08 To 0.25mm CCA Wire Drawing Machine]()
Product Tags:
|
|
Aluminum Wire Drawing Machine Inlet 0.5 To 1.0mm Outlet 0.08 To 0.25mm CCA Wire Drawing Machine Images
|
